TransActions – February 2014
Electric Vehicles: 21st Century Smart Grid Appliances?
Agriculture Energy Management Plans Benefit Farmers and Electric Utilities | VIEW
Electric Vehicles: 21st Century Smart-Grid Appliances?
For the past several years and notwithstanding the economic woes, growth in residential household load usage has been subdued by the impact of increased efficiencies in electric appliances. Government regulations in the past have called for more efficient HVAC systems, light bulbs, windows, insulation in new construction, etc. and the electrical industry is starting to see the impact on residential load forecasts. Utilities are coping with the fact that average use just isn’t growing the way it was in the latter part of the 20th century. There was a time when not everybody had a refrigerator, or a washer and dryer, or multiple TV sets. But now it’s the norm. These appliances are more affordable today than they were 50 years ago. Most people now have these appliances, and these markets are quickly becoming saturated. Saturated markets, increased efficiencies, and competitively low natural gas prices are the biggest reasons why average use projections are relatively flat for several years with longer-term growth coming from miscellaneous plug loads (iPads, laptops, cell phones, etc.). Utilities would love a new “washer and dryer” load to boost average use and ultimately revenue.
While level household consumption relieves some of the need to build additional system capacity, it is also hurting retail utility bottom lines. If only there was a new appliance or device that could simultaneously increase average use and not require a utility to invest in peaking capacity. The best household device that would be capable of achieving both of these things simultaneously would be large by residential standards (2+KW) and would need to run overnight when system demand is typically at its lowest. The answer, at this point, should be pretty clear. Look no further than plug-in electric vehicles (PEV) as one unique solution to declining revenue and average use problems. How perfect! Not only can PEVs boost revenue and average use, but think about the load factor improvements to the residential class. The residential class is typically known for dragging down the system average load factor as heating and cooling related loads produce spiked peaks for relatively short periods of time during the day compared to other customer classifications. Add in a 5-7 KW PEV load for 8 hours overnight, and almost all of these problems are solved! So why isn’t every electric utility across America dishing out incentives to help customers buy these system-saving devices? It’s not quite that simple. It never is.
Imagine a typical residential consumer has just purchased a new PEV. They arrive home at 5:30 from a long day of work, go inside and start cooking dinner, catch the news, and bump up the AC. Then, from a utility standpoint, something scary happens. The customer nearly double the house’s load by plugging in the PEV and allowing it to charge overnight. They are not thinking about the system ramifications and they do not care about the additional stress that is being put on the transmission and distribution lines that bring power to their home. The problem becomes even more magnified when potentially hundreds of their peers are doing the same thing across the system and adding demand during on-peak hours. So what can a utility do to reap the benefits of additional sales without purchasing new capacity?
The Role of Smart Grid Technologies in PEV Charging
AMI: AMI meters provide utilities incredible amounts of data regarding residential usage characteristics. They have enabled utilities to monitor system peaks instantaneously. In the past, they have been used to develop Time-of-Use rates for a user as a whole. Now, they’re being used to develop Time-of-Use rates for independently metered charging stations. With knowledge of the average PEV load shape, utilities are able to send price signals to customers that will incent them to charge their cars overnight as opposed to during peak times. This is a great way that a utility can take that PEV load and use it to improve system load factors and increase revenue while not adding any peaking load to the system. Below is the rate structure for San Diego Gas and Electric’s EV TOU 2 rate.
The price signal doesn’t get much clearer than this with users paying as much as a $0.13 per kWh premium to charge during peak times. AMI meters give utilities the ability to implement dynamic pricing programs for residential consumers.
Demand Response: Utilities have been enacting demand response (DR) programs for decades. The concept is not new. Utilities hope to, in the near future, use a similar technology to turn off charging stations and force users to charge during off-peak periods. This will enable utilities to shape the load of PEV charging.
V2G: Perhaps the more visionary PEV smart grid technology is called Vehicle-to-Grid (V2G). While the practice is not yet widespread, researchers at the University of Delaware1 are on the forefront in developing a method for pulling energy from PEV battery packs, and distributing to the grid. It turns out that, if and when PEV market share increases, utilities may find the home as a source for capacity. It will be interesting to see how this research unfolds and impacts the industry.
PEVs and Load Forecasts
As electric vehicles gain in popularity, utilities will need to begin to consider the important implications outlined above, including ways to manage the residential load shape. Another important question, from a planning perspective, is just how much PEV related load should be included in load forecasts?
President Obama declared in his 2011 State of the Union Address that, “With more research and incentives, we can break our dependence on oil with biofuels, and become the first country to have a million electric vehicles on the road by 2015.” This was a bold claim for a nation that, just the year prior, purchased more than 60% more Ford F-150’s than the leading mid-sized sedan, Toyota Camry. Specifically, President Obama stated that the Chevrolet Volt would make up roughly half of the 1 million electric vehicles on the road by 2015. By the end of 2013, less than 55,000 Chevy Volts had been sold, a far cry from the projected 250,000 the President had expected at this point. By the end of 2013, Americans had purchased just shy of 100,000 PEVs, out of a total of over 15.6 million light vehicle purchases. Obviously, PEVs are not taking the US by storm yet. Part of that can be blamed on the $40,000 sticker price of a Chevy Volt and part of that can be blamed on the lack of PEV alternatives. Through 2011, there were really only two PEVs to choose from. Along with the Chevy Volt, there was the Nissan Leaf.
But, that’s not to say PEVs are losing popularity. Sales in 2013 nearly doubled the 53,000 electric vehicles sold in 2012. There are now nearly 20 PEV alternatives. On top of that, Chevy has just slashed the sticker price of the Volt $5,000. After government rebates, a Volt can be picked up for just under $29,000. Now, consumers can compare purchase of a Volt against a new Chevy Malibu or Dodge Avenger instead of a Lexus or BMW. A competitive PEV market has made cars accessible to the middle class. This was a huge hurdle initially that is slowly being cleared.
Load forecasts are not likely to see a measurable impact from PEV in the next several years. It does, however, depend on the location of your utility. Currently, large west-coast cities such as San Francisco and Los Angeles hold the highest percentage of PEV on the road, accounting for 19.5% and 15.4% respectively. This is largely due to the charging station infrastructure that these cities have already built. Consumers are less likely to buy a PEV if they can only charge it at home. Furthermore, it is likely that adoption will move from urban to rural areas as a natural progression in how the infrastructure will be built. Therefore, municipal utilities and IOUs, especially in progressive regions of the country, will likely deal with noticeable and measurable PEV loads before rural cooperatives. As demand for PEVs grows, so too will the infrastructure to smaller cities and eventually rural areas. It’s the perfect time to start thinking about PEV integration.
For more information or to comment on this article, please contact:
Andrew Henson, Analyst | CONTACT
GDS Associates, Inc. – Marietta, GA
Agriculture Energy Management Plans Benefit Farmers and Electric Utilities
Agriculture is a vital industry in the United States, representing approximately $180 billion in the U.S. economy. Rising energy costs threaten the economic viability of farms and have rippling effects throughout the entire economy due to increased food costs and decreased availability. Effectively managing energy use on farms through cost effective energy efficiency and operational practices has become a major focus of the United States Department of Agriculture (USDA). However, the successful implementation of energy efficiency projects within the agricultural sector requires engineers and consultants with in-depth knowledge of the various agricultural enterprises and an appreciation of how individual farms are operated on a day-to-day basis. Shortages of qualified energy professionals within this sector present challenges to the successful identification and implementation of agricultural energy efficiency projects.
The USDA and the Natural Resources Conservation Service (NRCS) have recently implemented a new initiative to connect agricultural producers with energy professionals and provide financial incentives in an effort to promote agriculture energy audits and encourage implementation of cost effective energy improvement projects ranging from low cost operational measures through energy efficiency retrofits. An Agriculture Energy Management Plan, or AgEMP for short, is a great way for agriculture producers to find out the best ways to save energy (and money) on their farm. An AgEMP is a detailed analysis of an agriculture facilities’ current energy consumption which details how much energy each type of farm equipment is using. An AgEMP is a valuable tool for short and long term energy planning. It is not uncommon to find projects with zero to two year paybacks at agriculture facilities.
AgEMPs can be developed for all types of agriculture enterprises including dairies, greenhouses, poultry farms, hog farms, grain drying operations, maple syrup producers and many others. An important part of the AgEMP process is the assessment of each individual producer’s areas of interests and concerns, and integrating that feedback into a cohesive energy strategy for the future. An AgEMP prioritizes energy efficiency opportunities and helps producers decide what energy efficiency recommendations make the most sense for their operation. In the end, producers are able to improve their bottom line through effective energy management.
With an approved AgEMP on file with the local NRCS, producers may be eligible to receive payments for installation of the recommendations in the AgEMP, helping to make the payback even shorter for the recommended energy efficiency projects. The NRCS will pay up to 75% of the project cost towards the recommendations through the EQIP program. A qualified AgEMP report is kept on file for 5 years with the NRCS. This means that a producer does not have to rush and install all the efficiency recommendations at once but can do it over time as the projects make sense for the farm. To find out about specific payments, producers should contact their local USDA Farm Service Center.
AgEMPs not only benefit the farm owner by helping them decrease the amount of energy they use and reducing energy related costs, but can also benefit a utility, electric cooperative, or municipality that produces and sells energy. The projects implemented as a result of an AgEMP can help to reduce peak demand and reduce overall load requirements which can translate into not having to build, or delay the addition of, a new or larger power plant. Recommendations made through an AgEMP will often qualify for supplemental rebates and incentives from local utility providers. Many electric and natural gas service suppliers have energy efficiency programs which offer incentives or rebates to customers for installing energy efficient equipment on their farm. These incentives help to decrease the payback of an energy efficiency project and increase the likelihood that a producer will move forward with installation of the energy efficiency measure. To find out if your electric service provider offers financial assistance with installing energy efficiency projects contact your energy supplier or visit www.dsireusa.org.
Opportunities for energy savings in agriculture facilities can be found in many areas including high efficiency ventilation systems, variable speed drives, high efficiency compressors, heat recovery systems, pre-coolers, high efficiency lighting, and high efficiency heating systems, to name a few. Animal housing ventilation technologies have made great strides in recent years by improving the air flow per kW of power demand and incorporating staged control systems which automatically tailor the number of fans that run at one time. For example, 60 high-efficiency fans can provide the same air flow as 65 standard efficiency fans while saving 24 kW of power. Variable speed drives installed on dairy farm vacuum pumps have been shown to save 50% of energy over single speed pumps and 10% of overall dairy farm energy. Farms may also improve productivity and safety when they replace out-of-date lighting technologies with new, energy efficient lighting which can use up to half the wattage with improved light output.
Each state’s NRCS offers payments for AgEMPs and for energy improvements, however the payments differ by state. Producers who may be interested in taking advantage of this opportunity should sign up through their local NRCS office. There are some things that producers should consider during the sign up process, such as, it can be advantageous for producers to pay out-of-pocket for the audit in order to sign up directly for NRCS payments towards energy efficient equipment, and couple those payments with utility incentives. It is important for producers to properly complete the application process and ensure that they have AgEMP report on file with their local NRCS office so that they can take advantage of the payments offered by the NRCS for the implementation of the recommended energy efficiency measures.
GDS has completed over 3,000 agricultural energy audits, has a thorough understanding of agriculture enterprises and works closely with local farm service agencies and utility providers to help connect producers with any potential grants, rebates, or incentives. GDS helps agricultural producers identify and implement the most cost effective opportunities to save energy and money while leveraging external funding sources.
Contact GDS for additional information about GDS agriculture energy and AgEMP services.
For more information or to comment on this article, contact:
Bethany Reinholtz, Associate Engineer/Analyst | CONTACT
GDS Associates, Inc. – Madison, WI